[Forgot Password]
Login  Register Subscribe

30481

 
 

423868

 
 

256040

 
 

909

 
 

199103

 
 

282

 
 
 
Paid content will be excluded from the download.

Filter
Matches : 254275 Download | Alert*

In Firecracker 0.20.x before 0.20.1 and 0.21.x before 0.21.2, the network stack can freeze under heavy ingress traffic. This can result in a denial of service on the microVM when it is configured with a single network interface, and an availability problem for the microVM network interface on which the issue is triggered.

In Istio 1.5.0 though 1.5.8 and Istio 1.6.0 through 1.6.7, when users specify an AuthorizationPolicy resource with DENY actions using wildcard suffixes (e.g. *-some-suffix) for source principals or namespace fields, callers will never be denied access, bypassing the intended policy.

Go before 1.13.15 and 14.x before 1.14.7 can have an infinite read loop in ReadUvarint and ReadVarint in encoding/binary via invalid inputs.

Extreme Analytics in Extreme Management Center before 8.5.0.169 allows unauthenticated reflected XSS via a parameter in a GET request, aka CFD-4887.

An issue was discovered on Canon MF237w 06.07 devices. An "Improper Handling of Length Parameter Inconsistency" issue in the IPv4/ICMPv4 component, when handling a packet sent by an unauthenticated network attacker, may expose Sensitive Information.

When configuring stateless firewall filters in Juniper Networks EX4600 and QFX 5000 Series devices using Virtual Extensible LAN protocol (VXLAN), the discard action will fail to discard traffic under certain conditions. Given a firewall filter configuration similar to: family ethernet-switching { filter L2-VLAN { term ALLOW { from { user-vlan-id 100; } then { accept; } } term NON-MATCH { then { di ...

Mitsubishi MELSEC iQ-R Series PLCs with firmware 49 allow an unauthenticated attacker to halt the industrial process by sending a crafted packet over the network. This denial of service attack exposes Improper Input Validation. After halting, physical access to the PLC is required in order to restore production, and the device state is lost. This is related to R04CPU, RJ71GF11-T2, R04CPU, and RJ71 ...

On Juniper Networks Junos OS devices, receipt of a malformed IPv6 packet may cause the system to crash and restart (vmcore). This issue can be trigged by a malformed IPv6 packet destined to the Routing Engine. An attacker can repeatedly send the offending packet resulting in an extended Denial of Service condition. Only IPv6 packets can trigger this issue. IPv4 packets cannot trigger this issue. T ...

On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in (Ethernet VPN) EVPN-(Virtual Extensible LAN) VXLAN configuration, receipt of a stream of specific VXLAN encapsulated layer 2 frames can cause high CPU load, which could lead to network protocol operation issue and traffic interruption. This issue affects devices that are configured as a Layer 2 or Layer 3 gateway of a ...

On Juniper Networks SRX Series and NFX Series, a local authenticated user with access to the shell may obtain the Web API service private key that is used to provide encrypted communication between the Juniper device and the authenticator services. Exploitation of this vulnerability may allow an attacker to decrypt the communications between the Juniper device and the authenticator service. This W ...


Pages:      Start    13438    13439    13440    13441    13442    13443    13444    13445    13446    13447    13448    13449    13450    13451    ..   25427

© SecPod Technologies