Download
| Alert*
|
oval:org.secpod.oval:def:38614
When you shutdown a PC with Fast Startup turned on, Windows saves the current system state and the contents of memory to a file called hiberfil.sys and then it shuts down the computer. Later, when you turn on the computer, rather than performing a full load of the entire system, Windows reads only t ... oval:org.secpod.oval:def:35294 This policy setting controls Event Log behavior when the log file reaches its maximum size. If you enable this policy setting and a log file reaches its maximum size, new events are not written to the log and are lost. If you disable or do not configure this policy setting and a log file r ... oval:org.secpod.oval:def:35295 This security setting determines if, at the next password change, the LAN Manager (LM) hash value for the new password is stored. The LM hash is relatively weak and prone to attack, as compared with the cryptographically stronger Windows NT hash. Since the LM hash is stored on the local computer in ... oval:org.secpod.oval:def:35172 Specifies whether a Remote Desktop Session Host server requires secure RPC communication with all clients or allows unsecured communication. You can use this setting to strengthen the security of RPC communication with clients by allowing only authenticated and encrypted requests. If the s ... oval:org.secpod.oval:def:35293 This security setting determines whether anonymous enumeration of SAM accounts and shares is allowed. Windows allows anonymous users to perform certain activities, such as enumerating the names of domain accounts and network shares. This is convenient, for example, when an administrator wants to gr ... oval:org.secpod.oval:def:35290 Specifies the period of inactivity before Windows turns off the display. If you enable this policy, you must provide a value, in seconds, indicating how much idle time should elapse before Windows turns off the display. If you disable this policy or do not configure it, users can see and c ... oval:org.secpod.oval:def:35335 This policy setting allows you to turn off the Autoplay feature. Autoplay begins reading from a drive as soon as you insert media in the drive. As a result, the setup file of programs and the music on audio media start immediately. Prior to Windows XP SP2, Autoplay is disabled ... oval:org.secpod.oval:def:35336 This policy setting ignores the customized run list. You can create a customized list of additional programs and documents that the system starts automatically when it runs on Windows Vista, Windows XP Professional, and Windows 2000 Professional. These programs are added to the standard run list of ... oval:org.secpod.oval:def:35334 Windows notices inactivity of a logon session, and if the amount of inactive time exceeds the inactivity limit, then the screen saver will run, locking the session. Default: not enforced. Counter Measure: Configure this policy setting to 900 seconds (15 minutes) so that the risk of a user& ... oval:org.secpod.oval:def:35298 This policy setting controls the behavior of the elevation prompt for standard users. The options are: - Prompt for credentials: When an operation requires elevation of privilege, the user is prompted to enter an administrative user name and password. If the user enters valid credentials, ... oval:org.secpod.oval:def:35299 This policy setting specifies whether Remote Desktop Services always prompts the client for a password upon connection. You can use this setting to enforce a password prompt for users logging on to Remote Desktop Services, even if they already provided the password in the Remote Desktop Connection ... oval:org.secpod.oval:def:35209 Specifies whether to require the use of a specific encryption level to secure communications between client computers and RD Session Host servers during Remote Desktop Protocol (RDP) connections. This policy only applies when you are using native RDP encryption. However, native RDP encryption (as op ... oval:org.secpod.oval:def:35205 This security setting determines whether packet signing is required by the SMB server component. The server message block (SMB) protocol provides the basis for Microsoft file and print sharing and many other networking operations, such as remote Windows administration. To prevent "man-in-t ... oval:org.secpod.oval:def:35284 This security setting determines what additional permissions will be granted for anonymous connections to the computer. Windows allows anonymous users to perform certain activities, such as enumerating the names of domain accounts and network shares. This is convenient, for example, when an adminis ... oval:org.secpod.oval:def:35042 This policy setting specifies the maximum size of the log file in kilobytes. If you enable this policy setting, you can configure the maximum log file size to be between 1 megabyte (1024 kilobytes) and 2 terabytes (2147483647 kilobytes) in kilobyte increments. If you disable or do not conf ... oval:org.secpod.oval:def:35281 This policy setting controls Event Log behavior when the log file reaches its maximum size. If you enable this policy setting and a log file reaches its maximum size, new events are not written to the log and are lost. If you disable or do not configure this policy setting and a log file r ... oval:org.secpod.oval:def:36535 This security setting determines the period of time (in days) that a password can be used before the system requires the user to change it. You can set passwords to expire after a number of days between 1 and 999, or you can specify that passwords never expire by setting the number of days to 0. If ... oval:org.secpod.oval:def:35286 This security setting determines which challenge/response authentication protocol is used for network logons. This choice affects the level of authentication protocol used by clients, the level of session security negotiated, and the level of authentication accepted by servers as follows: Send LM & ... oval:org.secpod.oval:def:34988 The machine lockout policy is enforced only on those machines that have Bitlocker enabled for protecting OS volumes. Please ensure that appropriate recovery password backup policies are enabled. This security setting determines the number of failed logon attempts that causes the machine to be locke ... oval:org.secpod.oval:def:36526 This security setting determines if the Guest account is enabled or disabled. Default: Disabled. Note: If the Guest account is disabled and the security option Network Access: Sharing and Security Model for local accounts is set to Guest Only, network logons, such as those performed by the Microso ... oval:org.secpod.oval:def:35392 This policy setting controls Event Log behavior when the log file reaches its maximum size. Counter Measure: Configure this setting to Disabled. Potential Impact: If you enable this policy setting and a log file reaches its maximum size, new events are not written to the log and are lost. ... oval:org.secpod.oval:def:35390 This policy setting prevents connected users from being enumerated on domain-joined computers. If you enable this policy setting, the Logon UI will not enumerate any connected users on domain-joined computers. If you disable or do not configure this policy setting, connected users will be ... oval:org.secpod.oval:def:35038 This security setting determines what additional permissions are granted for anonymous connections to the computer. Windows allows anonymous users to perform certain activities, such as enumerating the names of domain accounts and network shares. This is convenient, for example, when an administrat ... oval:org.secpod.oval:def:35435 This policy setting determines if the SMB client will allow insecure guest logons to an SMB server. If you enable this policy setting or if you do not configure this policy setting, the SMB client will allow insecure guest logons. If you disable this policy setting, the SMB client will reject ... oval:org.secpod.oval:def:36488 This security setting determines whether a different account name is associated with the security identifier (SID) for the account Administrator. Renaming the well-known Administrator account makes it slightly more difficult for unauthorized persons to guess this privileged user name and password co ... oval:org.secpod.oval:def:35277 This policy setting controls whether RPC clients authenticate with the Endpoint Mapper Service when the call they are making contains authentication information. The Endpoint Mapper Service on computers running Windows NT4 (all service packs) cannot process authentication information supplied in t ... oval:org.secpod.oval:def:35156 Dictates whether or not Windows is allowed to use standby states when sleeping the computer. When this policy is enabled, Windows may use standby states to sleep the computer. If this policy is disabled, the only sleep state a computer may enter is hibernate. Counter Measure: During hibernat ... oval:org.secpod.oval:def:35032 This security setting determines whether packet signing is required by the SMB client component. The server message block (SMB) protocol provides the basis for Microsoft file and print sharing and many other networking operations, such as remote Windows administration. To prevent man-in-the-middle ... oval:org.secpod.oval:def:34979 This policy setting determines how far in advance users are warned that their password will expire. Microsoft recommends that you configure this policy setting to 14 days to sufficiently warn users when their passwords will expire. Determines how far in advance (in days) users are warned that their ... oval:org.secpod.oval:def:35020 This security setting determines if users' private keys require a password to be used. The options are: User input is not required when new keys are stored and used User is prompted when the key is first used User must enter a password each time they use a key For more information, see Pu ... oval:org.secpod.oval:def:35148 This policy setting determines how the SMB server selects a cipher suite when negotiating a new connection with an SMB client. If you enable this policy setting, the SMB server will select the cipher suite it most prefers from the list of client-supported cipher suites, ignoring the client& ... oval:org.secpod.oval:def:35388 Disabling data execution prevention can allow certain legacy plug-in applications to function without terminating Explorer. Counter Measure: We recommend that you disable this policy setting unless you have to support legacy business applications that do not support it. Potential Impact: ... oval:org.secpod.oval:def:35301 This policy setting enforces public key infrastructure (PKI) signature checks for any interactive applications that request elevation of privilege. Enterprise administrators can control which applications are allowed to run by adding certificates to the Trusted Publishers certificate store on local ... oval:org.secpod.oval:def:35023 This policy setting manages whether or not Windows is allowed to use standby states when putting the computer in a sleep state. If you enable this policy setting, Windows uses standby states to put the computer in a sleep state. If you disable or do not configure this policy setting, the only slee ... oval:org.secpod.oval:def:35420 This policy setting ignores customized run-once lists. You can create a customized list of additional programs and documents that are started automatically the next time the system starts (but not thereafter). These programs are added to the standard list of programs and services that the system st ... oval:org.secpod.oval:def:35021 This policy setting allows you to configure remote access to computers by using Remote Desktop Services. If you enable this policy setting, users who are members of the Remote Desktop Users group on the target computer can connect remotely to the target computer by using Remote Desktop Services ... oval:org.secpod.oval:def:35022 This security setting determines whether a domain member attempts to negotiate signing for all secure channel traffic that it initiates. When a computer joins a domain, a computer account is created. After that, when the system starts, it uses the computer account password to create a secure channe ... oval:org.secpod.oval:def:35385 Specifies whether or not the user is prompted for a password when the system resumes from sleep. Counter Measure: Configure Require a Password When a Computer Wakes (On Battery) to Enabled. Potential Impact: If you enable this policy, or if it is not configured, the user is prompted for a ... oval:org.secpod.oval:def:36509 This security setting determines the least number of characters that a password for a user account may contain. You can set a value of between 1 and 14 characters, or you can establish that no password is required by setting the number of characters to 0. Default: 7 on domain controllers. 0 on sta ... oval:org.secpod.oval:def:36504 This security setting determines whether passwords must meet complexity requirements. If this policy is enabled, passwords must meet the following minimum requirements: Not contain the user's account name or parts of the user's full name that exceed two consecutive characters * B ... oval:org.secpod.oval:def:35019 This policy setting determines whether all secure channel traffic that is initiated by the domain member must be signed or encrypted. If a system is set to always encrypt or sign secure channel data, it cannot establish a secure channel with a domain controller that is not capable of signing or encr ... oval:org.secpod.oval:def:35092 Devices: Prevent users from installing printer drivers when connecting to shared printers For a computer to print to a shared printer, the driver for that shared printer must be installed on the local computer. This security setting determines who is allowed to install a printer driver as part of c ... oval:org.secpod.oval:def:36501 This security setting determines the number of failed logon attempts that causes a user account to be locked out. A locked-out account cannot be used until it is reset by an administrator or until the lockout duration for the account has expired. You can set a value between 0 and 999 failed logon at ... oval:org.secpod.oval:def:35007 This policy setting specifies whether or not the user is prompted for a password when the system resumes from sleep. If you enable or do not configure this policy setting, the user is prompted for a password when the system resumes from sleep. If you disable this policy setting, the user is not pr ... oval:org.secpod.oval:def:35086 Specifies the period of inactivity before Windows turns off the display. If you enable this policy, you must provide a value, in seconds, indicating how much idle time should elapse before Windows turns off the display. If you disable this policy or do not configure it, users can see and c ... oval:org.secpod.oval:def:35084 This policy setting controls whether applications that request to run with a User Interface Accessibility (UIAccess) integrity level must reside in a secure location in the file system. Secure locations are limited to the following: - ...\Program Files\, including subfolders - ...\Windows\system32\ ... oval:org.secpod.oval:def:35364 This policy setting allows you to prevent Windows from installing removable devices. A device is considered removable when the driver for the device to which it is connected indicates that the device is removable. For example, a Universal Serial Bus (USB) device is reported to be removable by the dr ... oval:org.secpod.oval:def:35120 This policy setting specifies the security descriptor to use for the log using the Security Descriptor Definition Language (SDDL) string. You must set both "configure log access" policy settings for this log in order to affect the both modern and legacy tools. If you enable th ... oval:org.secpod.oval:def:35119 This policy setting specifies the security descriptor to use for the log using the Security Descriptor Definition Language (SDDL) string. You must set both "configure log access" policy settings for this log in order to affect the both modern and legacy tools. If you enable th ... oval:org.secpod.oval:def:35070 This security setting determines which registry paths and subpaths can be accessed over the network, regardless of the users or groups listed in the access control list (ACL) of the winreg registry key. Default: System\CurrentControlSet\Control\Print\Printers System\CurrentControlSet\Services\Even ... oval:org.secpod.oval:def:35071 This policy setting allows you to prevent app notifications from appearing on the lock screen. If you enable this policy setting, no app notifications are displayed on the lock screen. If you disable or do not configure this policy setting, users can choose which apps display notifications ... oval:org.secpod.oval:def:35232 When enabled, this security setting restricts anonymous access to shares and pipes to the settings for: Network access: Named pipes that can be accessed anonymously Network access: Shares that can be accessed anonymously Default: Enabled. Counter Measure: Configure the Network access: Restr ... oval:org.secpod.oval:def:35230 Specifies whether to require the use of a specific security layer to secure communications between clients and RD Session Host servers during Remote Desktop Protocol (RDP) connections. If you enable this setting, all communications between clients and RD Session Host servers during remote conne ... oval:org.secpod.oval:def:35352 This policy setting controls the behavior of application installation detection for the computer. The options are: - Enabled: (Default for home) When an application installation package is detected that requires elevation of privilege, the user is prompted to enter an administrative user name ... oval:org.secpod.oval:def:35231 This policy setting allows you to allow or deny remote access to the Plug and Play interface. If you enable this policy setting, remote connections to the Plug and Play interface are allowed. If you disable or do not configure this policy setting, remote connections to the Plug and Play in ... oval:org.secpod.oval:def:35108 This policy setting specifies the security descriptor to use for the log using the Security Descriptor Definition Language (SDDL) string. If you enable this policy setting, only users whose security descriptor matches the configured value can access the log. If you disable this policy sett ... oval:org.secpod.oval:def:35109 This policy setting specifies the security descriptor to use for the log using the Security Descriptor Definition Language (SDDL) string. You cannot configure write permissions for this log. If you enable this policy setting, only those users whose security descriptor matches the configured spe ... oval:org.secpod.oval:def:35227 This policy setting allows you to specify whether to require user authentication for remote connections to the RD Session Host server by using Network Level Authentication. This policy setting enhances security by requiring that user authentication occur earlier in the remote connection process. ... oval:org.secpod.oval:def:35223 Disabling heap termination on corruption can allow certain legacy plug-in applications to function without terminating Explorer immediately, although Explorer may still terminate unexpectedly later. Counter Measure: Disable this setting depending on your organization's requirements. ... oval:org.secpod.oval:def:36555 This security setting determines the number of minutes a locked-out account remains locked out before automatically becoming unlocked. The available range is from 0 minutes through 99,999 minutes. If you set the account lockout duration to 0, the account will be locked out until an administrator exp ... oval:org.secpod.oval:def:35103 System cryptography: Use FIPS 140 compliant cryptographic algorithms, including encryption, hashing and signing algorithms For the Schannel Security Service Provider (SSP), this security setting disables the weaker Secure Sockets Layer (SSL) protocols and supports only the Transport Layer Security ... oval:org.secpod.oval:def:35222 This policy setting controls the behavior of all User Account Control (UAC) policy settings for the computer. If you change this policy setting, you must restart your computer. The options are: * Enabled: (Default) Admin Approval Mode is enabled. This policy must be enabled and related UAC policy ... oval:org.secpod.oval:def:36551 This policy setting determines the number of days that you must use a password before you can change it. The range of values for this policy setting is between 1 and 999 days. (You may also set the value to 0 to allow immediate password changes.) The default value for this setting is 0 days. Count ... oval:org.secpod.oval:def:36547 This security setting determines the number of unique new passwords that have to be associated with a user account before an old password can be reused. The value must be between 0 and 24 passwords. This policy enables administrators to enhance security by ensuring that old passwords are not reused ... |
